#include
#include
#include
#include
#include
#include
#include
#include
/* Determines the overhead of tsc timing. Note the start/stop calls are
* inlined, so we're trying to determine the lowest amount of overhead
* attainable by using the TSC (or whatever timing source).
*
* For more detailed TSC measurements, use test_rdtsc() in k/a/i/rdtsc_test.c */
static void train_timing(void)
{
uint64_t min_overhead = UINT64_MAX;
uint64_t max_overhead = 0;
uint64_t time, diff;
int8_t irq_state = 0;
/* Reset this, in case we run it again. The use of start/stop to
* determine the overhead relies on timing_overhead being 0. */
__proc_global_info.tsc_overhead = 0;
/* timing might use cpuid, in which case we warm it up to avoid some
* extra variance */
time = start_timing();
diff = stop_timing(time);
time = start_timing();
diff = stop_timing(time);
time = start_timing();
diff = stop_timing(time);
disable_irqsave(&irq_state);
for (int i = 0; i < 10000; i++) {
time = start_timing();
diff = stop_timing(time);
min_overhead = MIN(min_overhead, diff);
max_overhead = MAX(max_overhead, diff);
}
enable_irqsave(&irq_state);
__proc_global_info.tsc_overhead = min_overhead;
printk("TSC overhead (Min: %llu, Max: %llu)\n", min_overhead,
max_overhead); }
/* Convenience wrapper called when a core's timer interrupt goes off. Not to be
* confused with global timers (like the PIC). Do not put your code here. If
* you want something to happen in the future, set an alarm. */
void timer_interrupt(struct hw_trapframe *hw_tf, void *data)
{
__trigger_tchain(&per_cpu_info[core_id()].tchain, hw_tf);
}
/*
* We use scaled integer arithmetic for converting between TSC clock cycles
* and nanoseconds. In each case we use a fixed shift value of 32 which
* gives a very high degree of accuracy.
*
* The actual scaling calculations rely on being able use the 128 bit
* product of two unsigned 64 bit numbers as an intermediate result
* in the calculation. Fortunately, on x86_64 at least, gcc's 128 bit
* support is sufficiently good that it generates optimal code for this
* calculation without the need to write any assembler.
*/
static inline uint64_t mult_shift_64(uint64_t a, uint64_t b, uint8_t shift)
{
return ((unsigned __int128)a * b) >> shift;
}
static uint64_t cycles_to_nsec_mult;
static uint64_t nsec_to_cycles_mult;
#define CYCLES_TO_NSEC_SHIFT 32
#define NSEC_TO_CYCLES_SHIFT 32
static void cycles_to_nsec_init(uint64_t tsc_freq_hz)
{
cycles_to_nsec_mult = (NSEC_PER_SEC << CYCLES_TO_NSEC_SHIFT) / tsc_freq_hz;
}
static void nsec_to_cycles_init(uint64_t tsc_freq_hz)
{
uint64_t divisor = NSEC_PER_SEC;
/*
* In the unlikely event that the TSC frequency is greater
* than (1 << 32) we have to lose a little precision to
* avoid overflow in the calculation of the multiplier.
*/
while (tsc_freq_hz >= ((uint64_t)1 << NSEC_TO_CYCLES_SHIFT)) {
tsc_freq_hz >>= 1;
divisor >>= 1;
}
nsec_to_cycles_mult = (tsc_freq_hz << NSEC_TO_CYCLES_SHIFT) / divisor;
}
uint64_t tsc2nsec(uint64_t tsc_time)
{
return mult_shift_64(tsc_time, cycles_to_nsec_mult, CYCLES_TO_NSEC_SHIFT);
}
uint64_t nsec2tsc(uint64_t nsec)
{
return mult_shift_64(nsec, nsec_to_cycles_mult, NSEC_TO_CYCLES_SHIFT);
}
/*
* Return nanoseconds since the UNIX epoch, 1st January, 1970.
*/
uint64_t epoch_nsec(void)
{
uint64_t cycles = read_tsc() - __proc_global_info.tsc_cycles_last;
return __proc_global_info.walltime_ns_last + tsc2nsec(cycles);
}
void time_init(void)
{
train_timing();
__proc_global_info.walltime_ns_last = read_persistent_clock();
__proc_global_info.tsc_cycles_last = read_tsc();
cycles_to_nsec_init(__proc_global_info.tsc_freq);
nsec_to_cycles_init(__proc_global_info.tsc_freq);
}