GETTING_STARTED Barret Rhoden Last thorough update: 2013-02-07 1. Overview --------------------- In this document, I outline what steps I go through to set up my development environment. Some devs use other setups, and they can put sections farther down in this document describing their steps. Due to the nature of different workflows and different Linux distros, you'll need to do some configuration of your environment. Things won't magically work out of the box. 2. Need help? --------------------- First off, if you get stuck, email someone. You can join our mailing list by sending an email to akaros-request@lists.eecs.berkeley.edu. Send your messages to akaros@lists.eecs.berkeley.edu. Or just email me (brho@cs), though the mailing list is a more scalable method in the long run. Alternatively, you can poke your head in #akaros on irc.freenode.net. I'm usually idling in there (alone), and if I'm at my computer, I'll respond. 3. From Download to Hello World --------------------- I'll describe how to get x86 working. RISCV is similar. The first step is to configure the kernel. config, menuconfig, and some of the other KBuild targets work. Defconfig gives you a default configuration. For example, to config for 64-bit x86: $ make ARCH=x86 defconfig Alternatively, you can run menuconfig to customize what settings you want: $ make ARCH=x86 menuconfig For x86, you can choose between 32 and 64 bit when you make menuconfig. This selection must match your cross compiler make command. The default is 64 bit. There are a lot of other settings when you make config, and you should browse through to decide what you want to enable/disable. Most everyone wants KFS turned on (Filesystems --> KFS filesystem). This is the in-memory filesystem that the kernel uses. The kernel build scripts will look at the "KFS/Initramfs paths" string and take any of those directories and add them to a CPIO archive that will eventually become the root filesystem when Akaros runs. These settings are set by default when you do a 'make defconfig'. There are also settings for ext2. If you turn on ext2 support, you need to point to an img file that has been formatted with ext2 and has files in it. If you aren't messing with filesystems at all, feel free to ignore this. It's an in-memory filesystem, like KFS (linked to the end of the kernel), so you won't gain much by using it for now. 3.1 Cross compiler (and glibc) ---------- The second step is to build the cross compiler, which lives in tools/compilers/gcc-glibc $ cd tools/compilers/gcc-glibc In this directory, you first need to set up your Makelocal file. There is a template to work from. $ cp Makelocal.template Makelocal You need to set your INSTDIRS to some place where you want the cross compiler installed. I have a directory named ros-gcc-glibc for this. You also need to add bin directories to your PATH where the cross compiler will be installed. This will vary based on your value for INSTDIRS. For instance, my path contains: /home/brho/classes/ros/ros-gcc-glibc/install-x86_64-ros-gcc/bin and /home/brho/classes/ros/ros-gcc-glibc/install-i686-ros-gcc/bin You can also set up MAKE_JOBS, so you don't over or under load your system when building. I have a 2 core laptop, so I use MAKE_JOBS := 3 At this point, you can build (for example): $ make x86_64 This might take a while (10-20 minutes for me on a 2007 era laptop). Just to double check everything installed correctly, you should be able to run x86_64-ros-gcc from your shell. Now, you have a cross compiler ready, and you can start to build Akaros. 3.2 Kernel ---------- cd back into the repo root. Like the cross compiler, the kernel has its own Makelocal. $ cp Makelocal.template Makelocal This file is used to set up custom make targets that are not part of the default Makefile, but fit nicely into your personal workflow. This file is not under version control and can me made to contain just about anything. Now you're ready to build the kernel: $ make So the kernel built, but you can't do much with it, and you probably have no programs. Notice that we didn't have to set the ARCH variable this time. The make system knows what architecture we are set up for and will always build for that architecture until a new ARCh is selected (i.e. via 'make ARCH=xxx defconfig' etc.) 3.3 Userspace --------- To build userspace and test programs: $ make tests You now have programs and libraries, and need to put them in KFS. To do this, we provide a 'fill-kfs' make target. $ make fill-kfs The 'fill-kfs' target copies your cross compiler's shared libraries and all test binaries into the first "KFS/Initramfs path" you set during configuration (or kern/kfs/lib if you just kept the default). Now that you've changed the contents of KFS's source, remake the kernel. You should see something like Building initramfs: Adding kern/kfs to initramfs... before the kernel links. If you don't see this, then you probably didn't actually fill KFS properly. 3.4 Busybox --------- If you don't care about busybox or just want to get started immediately, skip this section. Other userspace programs, like busybox need to be compiled with the cross compiler and then have their binaries copied to kern/kfs/bin (I do this manually). I'm running busybox 1.17.3, and the config file I use is in tools/patches/busybox. Copy that to your busybox directory (once you download and untar it, etc) and name it ".config". This config file assumes you want x86_64-ros-gcc. If you are builidng for 32 bit x86 or riscv, you will need to edit the config file. You can get busybox from http://www.busybox.net/downloads/. Eventually I'll upgrade, though it hasn't been a big deal yet. $ cd BUSYBOXDIR/.. $ wget http://www.busybox.net/downloads/busybox-1.17.3.tar.bz2 $ tar -jxvf busybox-1.17.3.tar.bz2 $ cd AKAROS-ROOT $ cp tools/patches/busybox/busybox-1.17.3.config BUSYBOXDIR/.config $ cd BUSYBOXDIR You'll also want to apply any patches for busybox. From the busybox directory: $ patch -p1 < AKAROS-ROOT/tools/patches/busybox/EACH_PATCH_FILE.patch $ make Then I copy the unstripped binary to KFS. $ cp busybox_unstripped AKAROS-ROOT/kern/kfs/bin/busybox Note I change the name to busybox (dropping the unstripped). I want the unstripped binary for debugging reasons. Busybox can do core commands like ls and rm, as well as run a shell (ash), all from within one binary. It can tell which command it should execute based on the name of the binary (or symlink to it). I have a bunch of symlinks for whatever 'busybox' programs I want to run inside kern/kfs/bin. For instance, from my AKAROS-ROOT: $ ls -l kern/kfs/bin/ | grep busybox lrwxrwxrwx 1 brho brho 7 Aug 24 2010 ash -> busybox -rwxr-xr-x 1 brho brho 337917 Dec 19 17:39 busybox lrwxrwxrwx 1 brho brho 7 Sep 29 2010 cat -> busybox lrwxrwxrwx 1 brho brho 7 Sep 1 2010 cp -> busybox lrwxrwxrwx 1 brho brho 7 Oct 18 13:12 kill -> busybox lrwxrwxrwx 1 brho brho 7 Sep 5 2010 ln -> busybox lrwxrwxrwx 1 brho brho 7 Aug 23 2010 ls -> busybox lrwxrwxrwx 1 brho brho 7 Sep 5 2010 mkdir -> busybox lrwxrwxrwx 1 brho brho 7 Sep 5 2010 rmdir -> busybox lrwxrwxrwx 1 brho brho 7 Apr 9 2012 stty -> busybox lrwxrwxrwx 1 brho brho 7 Apr 9 2012 tty -> busybox Note I don't need to update the symlinks (almost ever...). I just recopy the busybox binary whenever I update it. I think some of the other devs build busybox so that it spits out the links into an install directory. Feel free to do whatever. I'll probably just add a bunch of symlinks to the repos default KFS contents one of these days. Incidentally, kern/kfs/* is ignored by git. Now that you've changed KFS, don't forget to remake the kernel. 3.5 Building and Loading a Virtual Machine Image --------- At this point, you probably have a runnable kernel with programs in KFS. It should be sitting at obj/kernel/akaros-kernel. When running in a VM, you can either run the kernel directly from qemu, or put it in a virtual machine image file. If you don't want to bother with the image, skip this section. I tend to run my images off an image file, since qemu acts more like hardware (as far as multiboot goes). The downside is the boot up is slower, especially if you have a large kernel (>100MB). It also takes some effort to set up the VM image. If you are still reading, you'll need an image file that looks like a hard disk to boot qemu off of. I put one similar to mine at: http://akaros.cs.berkeley.edu/files/hdd268mb.img It's around 268MB (256MiB, or whatever). If you want to make your own, check out Documentation/howtos/make-bootable-grub-hdd.txt. That's actually the original document I made back when I first figured it out back in 2009, which has been updated again in 2013. In between, I wrote it up online at http://www.omninerd.com/articles/Installing_GRUB_on_a_Hard_Disk_Image_File, which has some other tidbits in the comments. Both methods still use grub1. Anyway, I put that img in AKAROS-ROOT/mnt/, and make a folder next to it: AKAROS-ROOT/mnt/hdd. mnt/hdd is the mount point where I mount hdd.img (Note I don't call it hdd64mb.img on my dev machine). Personally, I always have hdd.img mounted. Some of the other devs have make targets that mount and umount it. Whenever I reboot my development machine, I run a script (as root) that mounts the image file and sets up a few things for networking. I put a script I use for this in scripts/kvm-up.sh. You'll likely want to copy it to the directory *above* the akaros root directory and edit it accordingly. Feel free to comment out the networking stuff. That's for using networking in qemu. Now that your image file is mounted at mnt/hdd, you'll want to copy your freshly built kernel to the root of the image. I have a make target in my makelocal for this, so that whenever I do a make kvm, it builds the kernel and copies it to my hdd.img. I added edited versions of my KVM (and USB) make targets to the Makelocal.template. Uncomment the KVM one (at least). Incidentally, I also have the following in my Makelocal, so that make (and make all) also make kvm: all: kvm Now, make kvm. You should be able to see the new kernel in mnt/hdd/ (do an ls -l and check the timestamp). 3.6 Running Qemu --------- Here is the command I use to run qemu/kvm. It's evolved over the years, and it will vary based on your linux distribution. Don't run it just yet: $ qemu-system-i386 -s -enable-kvm -cpu phenom -smp 8 -m 2048 -nographic -monitor /dev/pts/3 -net nic,model=e1000 -net tap,ifname=tap0,script=no mnt/hdd.img If you skipped making a virtual machine image, replace "mnt/hdd.img" with "-kernel obj/kern/akaros-kernel". The -monitor is the qemu monitor, which is a CLI for qemu. Pick a tab/terminal/pty in Linux that you will only use for qemu monitoring, and enter 'tty'. Whatever it tells you, put in place of /dev/pts/3. I've been using the same tab for about 4 years now. In that tab, enter 'sleep 999999999'. Qemu will still access it, but you won't have to worry about bash trying to handle your inputs. -nographic allows qemu to work in the terminal you run qemu from, instead of spawning off a fake cpu crt/monitor. If you don't have networking set up (including the tun/tap stuff from kvm-up.sh), remove the -net commands/options. Fell free to pick different values for the number of cpus and RAM (8 and 1024 in the example). Once you finally run it, you can stop the VM by entering 'q' to the qemu monitor (or just killing the process).. Other help commands from the monitor include 'info cpus', 'info registers', 'x', and 'help'. 3.7 Running on Hardware --------- I have a few bootable USB sticks with grub set up to run Akaros. The make usb target (example in Makelocal.template) will copy freshly made kernels to your USB device. You'll need to adjust those paths according to your distro. My usb sticks are usually /dev/sdc, for instance (some odd USB device in the last couple of years has taken over /dev/sdb. Probably something to do with udev changing over the years). Anyway, you'll need to mess around a bit to get that working. Or I can dd one for you (I have 4GB disks in my office that I use). If you make your own, the critical part is getting grub to pick the right device (from what I remember), and its fairly similar to installing grub on any old hard drive (since it's just a bloc device). Much easier than a hard disk image file. 3.8 Hello World --------- So now you can run the kernel. It's time to edit a program (or make your own). In this, I'll go through my workflow for making changes. $ vi tests/hello.c (edit, save) $ make tests (new version in obj/tests/hello) $ make fill-kfs (updates kfs) $ make (rebuilds kernel with the new KFS) $ qemu... (following commands are in Akaros) Shift-G (to get to the kernel monitor) ROS(Core 0)> bb (to run busybox) / $ hello (Should print your message) 3.9 Other Dev Workflow stuff --------- One thing to note is that while we use dynamic linking for libc, parlib libraries are statically linked with applications. In fact, nowadays *all* Akaros programs need to be linked againt parlib (used to be that single-core processes (SCPs) didn't need it). The makefiles won't notice if you change a file in parlib and then remake a binary. So if you edit user/parlib/uthread.c for example, tests/pthread_test won't get rebuilt. Here's what I do: $ vi user/parlib/uthread.c (make awesome change) $ touch tests/pthread_test.c ; make tests This will force the rebuild of pthread_test. Older, untouched binaries (e.g. block_test), won't get rebuilt. I actually want this in some cases (different versions of parlib when I'm running certain tests). Anyway, just pay attention to what you're building. There's not much output in the console, so you should be able to see what's going on all the time. (unlike when building glibc...). Oh, and don't forget to: $ make fill-kfs to make sure you run the new pthread_test. Additionally, when switching between 32 and 64 bit x86, make objclean before filling KFS. This is the easiest way to make sure you get the appropriate libraries loaded in KFS. Early on as a dev, there are lots of times where you accidentally don't run the right program (or kernel) and won't understand why your change isn't happening. A few printk("WTF\n")'s later, you realize you didn't have the hdd.img mounted, or you didn't fill KFS, or you didn't relink your binaries, or you forgot to save all files in vi (and not just the current buffer). But after doing a couple hello worlds, you're set. Alternatively, you could have a make target to run qemu, which also touches all binaries (or otherwise enforces a rebuild), auto-fills KFS, remakes the kernel, and mounts/copies/unmounts your hdd.img. Kevin's sim repo has stuff like this, so check it out if that's what you're into. (I think it is at http://akaros.cs.berkeley.edu/ros-sim.tar.gz). Personally, I'm not that into it, since I like to keep track of what is going on under the hood, esp if I want to do something a little differently (like with testing ext2, having different versions of parlib with some binaries, or being picky about my mount/umounts). 4. RISCV --------------------- TODO. For now, you need a 64 bit distro to build the RISCV stuff, so I don't do it very often. I'll eventually sync up with Andrew and we'll get this part sorted out. 5. Other Developer's Stuff ---------------------